PCD Wire Drawing Dies

PCD Wire Drawing Dies Semi-Finished Products

Diamond Wire Drawing Die made of Polycrystalline Diamond Blanks
Fine semi-finished products of Polycrystalline Diamond Drawing Die and laser drilling Semi-Finished products of Diamond Drawing Dies.
IW offers our customers semi-finished products of ND Die,PCD Die,Mono Die,and others,who are experienced die makers.
In order to save the die making cost and labor cost,they can purchase our semi-finished products.As well,it is easy to controll their own quality.

As an experienced wire drawing dies manufacturer,Zhengzhou IW diamond Co., Ltd.provides customers with natural diamond wire drawing dies,polycrystalline diamond wire dies,single crystal diamond drawing dies,laser drilling semi-finished products and polycrystalline diamond wire drawing dies fine semi-finished products.

Products Range

mm	inches	ND	SSCD	PCD	TC
0.012-0.049	0.0005-0.0019	●	●
0.050-0.099	0.0019-0.0039	●	●
0.100-0.599	0.0039-0.0236	●	●	●	●
0.600-2.099	0.0236-0.0826	●		●	●
2.1-15.9	0.0827-0.6260			●	●
16.0-35.0	0.6260-1.3780				●

PCD Dies with IW PCD Blanks

inches	mm	ADDMA	IW	Maximum Diameter
0.0039-0.0157	0.100-0.400	D6	IW3210	0.4
0.0079-0.0315	0.200-0.800	D12	IW3215	0.8
0.0079-0.0394	0.200-1.000	D12	IW4215	1.0
0.0197-0.0591	0.500-1.500	D15	IW5225	1.5
0.0197-0.0591	0.500-1.500	D15	IW4223	1.5
0.0315-0.0787	0.800-2.000	D18	IW5235	2.0
0.0315-0.0787	0.800-2.000	D18	IW4229	2.0
0.0472-0.1181	1.200-3.100	D21	IW7240	3.1
0.0472-0.1181	1.200-3.100	D21	IW6838	3.1
0.0591-0.1732	1.500-4.400	D24	IW9553	4.4
0.0591-0.1732	2.000-4.400	D24	IW6853	4.4
0.1299-0.2126	3.300-5.400	D27	IW1285	5.4
0.1299-0.2183	3.300-5.800	D27	IW12987	5.8
0.2008-0.2992	5.100-7.600	D30	IW12912	7.6
0.3150-0.4331	8.000-11.000	D33	IW15215	11.0
0.3150-0.4409	8.000-11.200	D30	IW18213	11.2
0.3150-0.4724	8.000-12.000	D33	IW18215	12.0
0.3150-0.4921	8.000-12.500	D33	IW18217	12.5
0.3150-0.5000	8.000-12.700	D36	IW18218	12.7

The above hole sizes are recommended for soft wire.In case of hard wire drawing,the maximum hole size should not exceed 65% of them.

Typical Die Reduction Angles for Various Metals

Elongation	Area Reduction	Lead Zinc Silver Gold	Hard-Alalloys Nickel Copper	Brass Cualloys Stainless Steel	High Carbon Steel	Hot Drawing of Tungsten
5-9%	5-8%	14	10	9	8	10
9-14%	8-12%	16	12	11	10	10
14-19%	12-16%	18	14	13	12	12
19-33%	16-25%	22	18	16	15	14
33-54%	25-35%	24	22	18	18	16

Tolerance of Reduction Angle:+/-2°

Customized Design And Processing Semifinished Diamond Wire Drawing Die, ND PCD SSCD Blanks Wire Drawing Dies